Warm White LED Neon Rope Light | IP67 Waterproof Flexible Strip | Priced Per Metre

More than light. It’s ambience. Transform any space. Elevate every moment.

The DYZOVA Warm White LED Neon Rope Light is a premium flexible silicone strip that bends effortlessly to fit any space — indoors or out. Its continuous warm white neon glow is smooth, even, and hotspot-free, making it the go-to choice for cove ceilings, under-cabinet runs, staircase edges, garden borders, and architectural accents that demand a seamless finish. Priced per meter so you only pay for exactly what you need.

✦ IP67 Waterproof | 8mm Thickness Variants | Flexible & Cuttable | Warm White Seamless Glow | Priced Per Meter

Where Light Transforms Everything

Flexible. Elegant. Endless possibilities.

A single meter of this neon rope light does more for a room than most fixtures ten times its price. Run it along a cove ceiling and the room gains height. Tuck it under a kitchen cabinet and the worktop glows. Line a staircase edge and every step becomes a feature. Border a garden path and the landscape comes alive after dark.

The silicone outer jacket diffuses the LED output into a smooth, continuous neon-style glow with no visible hotspots or LED dots — just a clean, warm line of light that follows every curve and corner you ask it to. IP67 rated, it handles rain, moisture, and outdoor exposure without compromise.

Available in 6mm and 8mm thickness variants — choose 6mm for tighter channels and recessed profiles, 8mm for a bolder, brighter output in open runs.

Designed For

• 🛌 Bedrooms — cove ceiling or under-bed accent lighting that creates a cosy, relaxing retreat
• 📺 Living Spaces — add depth, warmth, and a touch of luxury to TV units and feature walls
• 🍳 Kitchens — under-cabinet task lighting with a modern, seamless finish
• 🚶 Staircases — guide the way safely and beautifully with edge-lit steps
• 🏠 Exteriors — enhance architecture with warm outdoor accents along rooflines and facades
• 🌿 Landscapes & Gardens — highlight paths, edges, and garden features after dark

Key Features

• IP67 Waterproof Rating – Fully protected against dust and water immersion — safe for outdoor, garden, and wet-area use.
• Seamless Neon Glow – Silicone diffuser jacket produces a smooth, continuous warm white glow with no visible LED hotspots or dots.
• Two Thickness Variants – Available in 6mm (slim, recessed profiles) and 8mm (bolder, brighter open runs) to suit different installation requirements.
• Fully Flexible – Bends effortlessly around curves, corners, and architectural profiles without kinking or cracking.
• Cut-to-Length – Can be cut at designated intervals to fit your exact run length — no waste, no excess.
• Priced Per Metre – Order exactly the length you need — ideal for custom installations of any size.
• Warm White Output – Warm LED colour temperature flatters every interior and exterior surface it illuminates.

Installation Guide

1. Step 1: Plan Your Run — Measure the total length of your installation run and order the exact number of meters required. Add 5–10% for cuts and joins.
2. Step 2: Prepare the Surface — Clean and dry the mounting surface. For cove ceilings or channels, ensure the profile is clear of debris.
3. Step 3: Cut to Length — Cut the rope light at the designated cut marks using sharp scissors or a craft knife. Do not cut between marked intervals.
4. Step 4: Mount the Strip — Peel the adhesive backing and press firmly into the channel or along the surface. For outdoor or high-humidity use, secure with mounting clips for additional hold.
5. Step 5: Connect to Power — Connect the rope light to a compatible LED driver or transformer rated for the total wattage of your run. Ensure the driver is IP-rated for outdoor use if applicable.
6. Step 6: Test & Seal — Power on and confirm the full run illuminates evenly. For outdoor installations, seal all cut ends with waterproof end caps to maintain the IP67 rating.

⚠️ Always use a compatible LED driver rated for the total wattage of your rope light run. Do not exceed the maximum run length without a signal amplifier. Seal all cut ends for outdoor installations to maintain waterproof integrity.

Technical Specifications

Frequently Asked Questions

Q: Is this priced per meter or for the full reel?

A: It is priced per meter — order exactly the length you need. The quantity you add to cart equals the number of meters you will receive.

Q: What is the difference between the 6mm and 8mm variants?

A: The 6mm variant is slimmer and ideal for recessed channels, tight profiles, and installations where a discreet fit is required. The 8mm variant is slightly thicker and produces a boulder, brighter output — better suited for open runs and more prominent accent lighting.

Q: Is a power supply included?

A: No. A compatible LED driver or transformer is required separately. Ensure the driver is rated for the total wattage of your rope light run and IP-rated for outdoor use if applicable.

Q: Can it be used outdoors in rain?

A: Yes. The IP67 rating means it is fully protected against dust and water immersion. For outdoor installations, seal all cut ends with waterproof end caps to maintain the IP67 rating.

Q: Can I cut it to a custom length?

A: Yes. The rope light can be cut at designated cut marks to fit your exact run length. Always cut only at the marked intervals — cutting between marks may damage the LEDs.

Q: Is there a maximum run length?

A: Yes. Exceeding the maximum continuous run length without a signal amplifier may result in voltage drop and uneven brightness. Contact us for guidance on longer installations.