Modern Cube Wall Light | IP65 Outdoor LED | Adjustable Beam Angle | 12W 3000K Matte Black

Minimal design. Maximum impact.

The DYZOVA Modern Cube Wall Light is exactly what it looks like — and that is everything. A precision-cast high-grade aluminium cube in matte black, 100 mm on every side, that mounts flush to any wall and projects a focused, warm 3000K beam simultaneously upward and downward through its open face. At 12W with 960 lumens, it delivers serious light output from a form that weighs less than half a kilogram. The beam angle is adjustable from 0° to 100°, letting you control exactly how wide or how focused the spread hits your wall. With an IP65 waterproof rating, snowproof construction, heat resistance to +45°C, and a lifespan of 50,000+ hours, this cube is built for Pakistani outdoor conditions — gates, facades, courtyards, and corridors — without compromise. It is equally at home indoors on a feature wall, corridor, or staircase. Designed for modern architecture. Built for all environments.

✦ IP65 Waterproof  |  12W Integrated LED  |  960 Lumens  |  3000K Warm White  |  Adjustable Beam 0°–100°  |  Matte Black Aluminium  |  220V AC  |  50,000+ Hours  |  2-Year Warranty

5 Reasons It Stands Out

Minimal design. Maximum impact.

• 💧 IP65 Waterproof — Built to perform in any weather. IP65 certification means the fixture is fully protected against dust ingress and against water projected from any direction — rain, monsoon, hose wash-down. Install it outdoors with complete confidence.
• ☀️ Warm & Efficient LED — High-output LED for beautiful illumination. 12W of integrated LED delivers 960 lumens of warm 3000K light — powerful, flattering, and running at a fraction of the energy cost of traditional halogen equivalents.
• 🛡️ Durable Aluminium — Premium build for lasting reliability. The entire body is precision-cast from high-grade aluminium with a matte black powder coat finish — resistant to corrosion, UV degradation, and physical impact through decades of outdoor use.
• 🔧 Easy Installation — Simple wall mount in minutes. Four straightforward steps — base plate, wires, body, power — with all mounting hardware included. The cube body simply aligns and slides down onto the mounted base plate to lock in place.
• 🎯 Adjustable Beam Angle — Control light direction with precision. The beam aperture is adjustable from 0° (fully closed, focused downward wash) to 100° (fully open, maximum upward and downward spread) — set once during installation to exactly the spread you want.

“Finally, an outdoor light that looks as good as it performs.”

Usman R. — Lahore, Pakistan — ★★★★★ Verified Customer

Built for Every Condition

• 💧 IP65 Waterproof — Fully sealed against dust and water projection from any direction. Monsoon-ready.
• ❄️ Snowproof — Resists snow and ice for reliable outdoor use across all seasons and climates.
• 🌡️ Heat Resistant — Engineered to withstand high operating temperatures up to +45°C — critical for Pakistan’s summer conditions.
• ⛈️ Extreme Weather — Designed for durability in extreme conditions. Operating temperature range: -20°C to +45°C.
• 🛡️ Durable Aluminium — Premium aluminium body for long-lasting outdoor use. No rust, no warping, no fading.
• ⏱️ 50,000+ Hours Lifespan — The integrated LED is rated for 50,000+ hours of operation — that is over 17 years of use at 8 hours per day. No bulb replacements, ever.

Designed For

• 🏛️ Gate & Entrance Pillars — the matte black cube on a white or rendered pillar is one of the most impactful exterior lighting statements possible; the upward and downward beam wash frames the entrance dramatically at night
• 🏠 House Facades & Exterior Walls — installed in pairs or multiples across a facade, the cube wall lights create a rhythmic, architectural lighting pattern that transforms how a home reads at night
• 🌳 Courtyards, Gardens & Outdoor Terraces — IP65-rated and heat-resistant, perfectly suited for any outdoor entertaining or living area; the warm 3000K beam creates a welcoming, intimate outdoor atmosphere
• 🚪 Corridors, Hallways & Staircases (Indoor) — equally at home indoors; the focused upward/downward beam wash on a corridor wall creates a striking architectural feature in any modern interior
• 🏢 Commercial Facades, Hotels & Restaurants — the precision-cast matte black cube is a specification-grade fixture that delivers a premium exterior finish for hospitality and commercial properties
• 🎁 Housewarming & Premium Gift — a pair of these installed at a gate or entrance makes an exceptional and immediately impactful gift for a new home

Key Features

• IP65 Waterproof & Weatherproof — Fully rated IP65 — dust-tight and protected against water from any direction. Snowproof, heat-resistant to +45°C, and rated for operating temperatures down to -20°C. The definitive outdoor-grade wall light.
• 12W Integrated LED — 960 Lumens / 3000K / CRI ≥ 80 — A high-quality integrated LED module delivers 960 lumens of warm white (3000K) light with a CRI of ≥80 for accurate, flattering colour rendering. No bulb to replace — ever.
• Adjustable Beam Angle — 0° to 100° — The beam aperture screw on the side of the cube adjusts the spread from a tight, focused downward wash to a fully open upward-and-downward fan. Set during installation to your preferred spread and lock in place.
• High-Grade Aluminium Body — Matte Black — Precision-cast from high-grade aluminium and finished in matte black powder coat. 100 mm × 100 mm × 100 mm — a perfect cube that weighs only 450g. No plastic. Corrosion-resistant and UV-stable.
• 50,000+ Hour LED Lifespan — The integrated LED module is rated for 50,000+ hours of operation. At 8 hours per day, that is over 17 years without a bulb replacement or maintenance call.
• 220V AC / 50–60Hz Compatible — Fully compatible with standard Pakistani 220V electrical supply. No driver, adaptor, or transformer required.
• Wall Mount — Surface Installation — The cube body slides down onto a wall-mounted base plate and locks in place with a side screw. Clean, minimal, and completely flush to the wall surface.
• 2-Year Limited Warranty — Every DYZOVA Cube Wall Light is backed by a 2-year limited warranty — quality you can rely on, performance you can trust.

Installation Guide

Care: Wipe with a soft, dry cloth only. Do not use harsh chemicals or abrasive cleaners.  |  ⚠️ Turn off the power before installation. Installation by a qualified person is recommended.

1. Step 1: Mount the Base Plate — Turn off power at the circuit breaker. Hold the base plate against the wall at your desired position, mark the fixing holes, drill, and secure the base plate firmly using the provided screws. Ensure it is level and flush.
2. Step 2: Connect the Wires — Feed the supply wires through the base plate and connect to the fixture’s wires using the provided connectors, following local wiring standards (Live, Earth, Neutral). Ensure all connections are tight and fully insulated.
3. Step 3: Attach the Light Body — Align the cube light body over the mounted base plate, slide it down to engage the locking tabs, and tighten the side screw to secure the body firmly in place.
4. Step 4: Power On & Enjoy — Restore power at the circuit breaker, switch on, and enjoy your light. Adjust the beam angle screw to your preferred spread if required.

⚠️ Always turn off the power supply before installation. Electrical installation must be carried out by a qualified electrician. Suitable for outdoor use — IP65 rated. Do not immerse in water. Do not use harsh chemicals or abrasive cleaners on the fixture surface.

Technical Specifications

Frequently Asked Questions

Q: Can it be used outdoors in Pakistan’s monsoon season?

A: Yes. The IP65 rating means the fixture is fully sealed against dust and against water projected from any direction — including monsoon rain. It is also rated for operating temperatures up to +45°C, making it suitable for Pakistan’s summer heat.

Q: Does it require a separate driver or transformer?

A: No. The fixture has an integrated LED driver and is rated for 220V AC / 50–60Hz — fully compatible with standard Pakistani electrical supply. Connect directly to your wall supply with no additional components required.

Q: Can the beam angle be changed after installation?

A: Yes. The beam angle adjustment screw on the side of the cube can be accessed and adjusted at any time, even after installation, to change the spread from tight and focused to wide and open.

Q: Does it require a bulb replacement?

A: No. The LED is integrated into the fixture and rated for 50,000+ hours — over 17 years at 8 hours per day. There is no bulb to replace during the normal lifetime of the product.

Q: Is it suitable for indoor use as well?

A: Yes. While it is fully rated for outdoor use, the Modern Cube Wall Light is equally suited to indoor installation on corridor walls, staircase features, and accent walls in modern interiors.

Q: Does it require a professional electrician to install?

A: Yes. This is a hardwired wall fixture. Electrical installation must be carried out by a qualified electrician to ensure safety and compliance with local electrical codes.

Q: What is covered by the 2-year warranty?

A: The 2-year limited warranty covers manufacturing defects under normal use and installation conditions. It does not cover physical damage, water ingress from improper installation, or misuse.